Visteon Blower Motor Removal for Sierra and Silverado?

Visteon Blower Motor replacing procedure is mentioned below:---

The details and diagrams are as follows:----

1. Remove the sound insulator panel.
2. Disconnect the electrical connector (2) from the blower motor (1).
3. Remove the screws from the blower motor (1).
4. Remove the blower motor (1) from the HVAC module (3).
5. Remove the retainer from the blower motor wheel. Discard the retainer.
6. Remove the blower motor wheel from the blower motor (1). 
   
   
   
   Fig. Replacing blower motor-Visteon

To install:

1. Install the blower motor wheel to the blower motor (1).
2. Install the New retainer to the blower motor wheel.
3. Install the blower motor (1) to the HVAC module (3).
4. Install the screws to the blower motor (1).
   1. Tighten the screws to 18 inch lbs. (2 Nm).
5. Connect the electrical connector (2) to the blower motor (1).
6. Install the sound insulator panel.

These details will help.

Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html