BannerFans.com

Monday, April 23, 2012

How to Replace Rear Bank Exhaust Manifold?

The Procedure to Remove/ install Rear Bank Exhaust Manifold.

Procedure Covers all U.S. and Canadian models of the Chrysler/Dodge Avenger, Chrysler Sebring Coupe and Dodge Stratus/ Stratus Coupe models for Year 1999 to 2005.

The Rear Bank Replacing Procedure is as follows:---



  1. Remove or disconnect the following:

    Negative battery cable
    Intake manifold plenum and plenum stay
    Heated Oxygen (HO 2 ) sensor
    Alternator
    Exhaust Gas Recirculation (EGR) pipe assembly
    Exhaust pipe-to-exhaust manifold locknuts, separate the exhaust pipe and discard the gasket
    Manifold heat shield, if equipped
    Exhaust manifold bolts, the exhaust manifold brace, the exhaust manifold and the gasket
To install:
  1. Clean all gasket material from the mating surfaces and check the manifold for cracks or warpage.
  2. Install or connect the following:

    New gasket, the manifold and manifold brace and torque the nuts, in a crisscross pattern, to 22 ft. lbs. (30 Nm)
    Manifold heat shield, if equipped
    Exhaust pipe-to-exhaust manifold using a new gasket and torque the nuts to 33 ft. lbs. (44 Nm)
    EGR pipe assembly
    Alternator
    HO 2 S sensor
    Intake manifold plenum and plenum stay (brace)
    Negative battery cable
  3. Start the engine, check for exhaust leaks and repair if necessary.

These details will help.
Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


No comments:

Post a Comment