How To Replace HVAC Auxiliary Control Panel on Cadillac?

The details mentioned will work For Cadillac CTS and DTS car models.

Auxiliary control panel replacing procedure is as follows:-----

1. Remove the Instrument Panel (I/P) accessory trim plate.
2. Remove the HVAC control module assembly screws.
3. Disconnect the electrical connectors from the HVAC control module assembly. 
   
   
   
   Fig. HVAC control module assembly removal

To install:

1. Connect the electrical connectors to the HVAC control module assembly.
2. Install the HVAC control module assembly into the I/P.
3. Install the HVAC control module assembly screws. Tighten the screws to 17 inch lbs. (1.9 Nm).
4. Install the I/P accessory trim plate.
5. Reprogram the HVAC control module.
6. Before servicing the vehicle, refer to the Precautions Section.
7. Using a flat-bladed tool, carefully pry out on the top of the HVAC control-auxiliary.
8. Remove the HVAC control-auxiliary from the center console.
9. Disconnect the electrical connector.
10. Remove the HVAC control-auxiliary. 
    
    
    
    Fig. HVAC control-auxiliary removal

To install:

1. Connect the HVAC control-auxiliary electrical connector.
2. Install the HVAC control-auxiliary in the console bottom first.
3. Push in at the top of the HVAC control-auxiliary in order to engage the HVAC control -auxiliary in the console.
4. Reprogram the HVAC control-auxiliary.

These details will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html