How to replace Compressor on Chevrolet Corvette?

In this chapter the Compressor Removal procedure is mentioned for Chevrolet car models.
The details for Chevy Corvette compressor replacing is as follows:----

The complete procedure with additional help diagrams is mentioned below:---

CAUTION

Before beginning this procedure, refer to the precautions at the beginning of this section. Only a MVAC-trained, EPA-certified, automotive technician should service the A/C system or its components.

1. Recover the refrigerant from the A/C System.
2. Remove the A/C drive belt.
3. Remove the A/C compressor hose assembly from the A/C compressor.
4. Lower the front suspension crossmember.
5. Disconnect the A/C compressor electrical connector.
6. Remove the A/C compressor mounting bolts (1, 2, 4).
7. Remove the A/C compressor mounting nut 3.
8. Remove the A/C compressor from the vehicle.

To install:

Fig. Tighten the A/C compressor mounting bolts in sequence as shown

1. Install the A/C compressor to the vehicle.
2. Finger tighten the A/C compressor bolts and nuts only, do not torque at this time.
3. Position the A/C compressor onto the A/C compressor bracket and install the A/C compressor mounting bolts (1, 2, 4).
4. Install the A/C compressor mounting nut 3.
5. Tighten the A/C compressor mounting bolts and nut in sequence as shown to 37 ft. lbs. (50 Nm).
6. Connect the A/C compressor electrical connector.
7. Raise and install the front suspension crossmember.
8. Install the compressor hose assembly to the A/C compressor.
9. Install the A/C drive belt.
10. Evacuate and recharge the A/C System.
11. Leak test the fittings of the A/C components.

These details will help.

Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html