BannerFans.com

Sunday, April 15, 2012

Chrysler Crossfire Intake Manifold replacing details?

Complete procedure to replace Intake Manifold.

The step by step info to remove/ install intake manifold is as follows :---


  1. Drain the cooling system.
  2. Properly relieve the fuel system pressure.
  3. Remove or disconnect the following: 

    Negative battery cable
    Air intake assembly
    Mass Air Flow (MAF) sensor
    Fuel rail and injectors
    Vacuum lines
    Engine wiring connectors
    EGR pipe at EGR valve
    Air pump switchover valves
    Intake manifold
    image 
    Fig. Exploded view of the intake manifold
To install:
  1. Install or connect the following:

    Intake manifold using new gaskets. Torque the bolts to 15 ft. lbs. (20 Nm).
    Air pump switchover valves
    EGR pipe at EGR valve and tighten to 30 ft. lbs. (40 Nm)
    MAF sensor
    Engine wiring connectors
    Vacuum lines
    Fuel rail and injectors
    Air intake assembly
    Negative battery cable
  2. Fill and bleed the cooling system.
  3. Start the engine and check for leaks.

These details will help.
Thanks.           

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


No comments:

Post a Comment