BannerFans.com

Tuesday, November 8, 2011

How to remove and install clutch Driven Disc & Pressure Plate for 2003 ford focus


Driven Disc & Pressure Plate


Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  3. Loosen the clutch pressure plate-to-flywheel bolts evenly, by two turns at a time.
  4. Remove the clutch pressure plate-to-flywheel bolts, the clutch disc, and the pressure plate. Discard the bolts.

    Click image to see an enlarged view
    Fig. Use of clutch aligner.
To install:
  1. Clean the clutch pressure plate and flywheel with a commercial alcohol-based solvent so surfaces are free from oil film.
    WARNING
    Do not use cleaners with a petroleum base. Do not immerse the clutch pressure plate in solvent.
  2. Position the clutch disc on the clutch pressure plate.
  3. Using a suitable clutch aligner, centralize the clutch disc to the clutch pressure plate.
  4. Using a suitable clutch aligner, position the clutch disc and clutch pressure plate on the flywheel.
  5. Install the six new clutch pressure plate-to-flywheel bolts.
  6. Tighten the bolts evenly in a star pattern to 21 ft. lbs. (29 Nm)
    WARNING
    Remove the clutch aligner.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:

    Negative battery cable
    Transaxle; see -Manual Transaxle Assembly- section
    Loosen the pressure plate to flexplate bolts evenly in 1 / 2 turn steps.
    Pressure plate and clutch disc
To install:
  1. Install the clutch disc and pressure plate, using a proper clutch alignment tool.
  2. Tighten the pressure plate bolts evenly in 1 / 2 turns to 21 ft. lbs. (29 Nm).
  3. Install the transaxle. See -Manual Transaxle Assembly- section.
  4. Connect the negative battery cable.
------------------------
For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?


----------



No comments:

Post a Comment